Ozone generation equipment and ozone-handling parts. The DWT OG5 is a 5 g/h corona-discharge generator with forced-air cooling, rated at an outlet concentration of 15 to 25 g/m³ and 140 W. It runs on its integral dry-air feed or on an external oxygen supply, in a stainless steel enclosure with a 120-minute timer or continuous duty. For service and system builders, a 5 g/h ceramic ozone cell and its matching power supply are listed separately. Ozone check valves in 1/4" and 3/8" sizes and ozone tubing complete the gas line. Typical duties are drinking-water and bottled-water process sterilisation, and air sterilisation in food plants, cold stores and processing areas.
We're still adding our full range and more datasheets. If a part isn't listed, send us the code: we stock and source more than this catalogue shows.
Size the generator on ozone demand in grams per hour, not on water flow alone: demand rises with the oxidisable load, the contact time and the residual required. Rated output assumes a dry, clean feed gas; moist or dusty air lowers output and shortens cell life, so keep the air feed dry or use an oxygen supply for higher demand. Fit a check valve between the injection point and the generator so that water cannot flow back into the cell. Use ozone-resistant materials for every line and fitting: stainless steel, PTFE, PVDF or ozone-rated silicone. Ozone is a respiratory irritant; ventilate plant rooms and do not occupy a space during gas-phase dosing.
Tick lines to compare them side by side or add them to your quote list together.
Ceramic ozone cell, 5 g/h
DWT OG5 ozone generator, 5 g/h, air-cooled
Ozone generator 5 g/h, air feed
Power supply for 5 g/h ceramic ozone cell
Ozone check valve, 1/4"
Ozone check valve, 3/8"
Ozone tubing
Lead times are indicative estimates only, based on typical supply at time of publication, and are confirmed at order acceptance. Actual times may vary with supplier stock, manufacturing, importation, customs and logistics.
